Ineos Grenadier Hidden 12.5K Winch Kit - Synthetic Line

Need an upgraded winch for your Grenadier but don't want to lose the sleek integrated look? GP Factor came up with a solution that's just as stealth. This is GP's integrated winch that fits all Grenadier models with a factory metal front bumper. All factory functionality is retained, with the only required modification being slight trimming to a plastic behind the grill. For a clean install, all the controls, electronics and wiring are built into the winch mount. 

All components have been made specifically for the Grenadier, giving factory-like fit and finish: the Come Up Seal Slim 12.5RS winch is exclusive to this application. It has 65ft of line total, or about 55ft of usable line, a huge 83% increase compared to the factory unit. A custom fairlead made out of billet aluminium prevents binding and maintains the aesthetics. The winch mount is built to withstand any abuse, being fabricated from 1/4" steel, welded, zinc primered, and ultimately powder coated for durability.

For trucks equipped with high-load auxiliary switch panels, this winch can be wired into the factory panel; those without can use GP's battery disconnect kit (GPFIG-0230).

Come Up Seal Slim 12.5 RS Winch Specifications

Note: this winch is custom spec'd for the kit, it's not an off-the-shelf unit.

• Rated line pull: 5,670 kg / 12,500 lb single line
  Line speed (1st layer): 7.7 mpm / 25.3 fpm 45 A at 12V no load; 0.9 mpm / 3.0 fpm 470 A at 12V full load
• Motor: 3,730 w / 5.0 hp 12V series wound
• Gear ratio: 3-stage planetary 225:1
• Clutch (freespooling): Rotating ring gear
• Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
• Winch construction: Aluminum die cast housings with steel drum
• Drum size: 63.5 mm x 227L mm (2.5” x 8.9”L)
• Control: Both built-in digital two way signal wireless remote control and waterproof remote with thermometric indicator
• LED w/ 5 m (17') cord
• Rope type: Synthetic rope
• Rope size: 65' - (55' Approx Usable)
• Mounting bolt pattern: 254 mm x 114 mm (10” x 4.5”)
• Mounting: Foot forward mounting workable

Kit Features

• Integrated design in factory bumper
• Winch & mount are 115lbs combined
• Zinc primed & black powder coat finished
• Fits Grenedier with factory metal front bumper
• 65ft total of synthetic line

Includes

• Winch
• Red, black, yellow, blue, white cables
• Wireless remote module and harness
• Wiring harness for connection to winch and
• solenoid box
• Wired controller plug-in port
• On/Off switch
• Solenoid box
• x3 Cable boots (pre-installed on white, blue
  and yellow cables)
• Winch hook, pin, and retaining ring
• Winch mount
• Fairlead & spacer
• Trim ring clip & filler
• Hardware