Clayton Off Road Inc. builds the ultimate 3 link suspension system. We start by using pro series arms. Pro series arms feature forged johnny joints at both ends for maximum flex and adjustability. We use the same 3 piece cross member used in all our long arm kits for easy access to your transmission. The 3 link version comes with two upper mounts for the single pro series upper arm. If you are using a stock D30 front axle you can use the optional 3 link bridge or truss. This gives you a very strong mounting location to attach the top 3 link axle mount. This mount will NOT work on aftermarket axles. We will include a standard 3 link mount which you can weld to your axle or aftermarket bridge depending on your axles configuration. When using the Pro-Series lower arms, we highly recommend the Heavy duty lower control arm brackets [PN COR-1100104], which have a skid plate to protect the lower johnny joint.
NOTE: We recommend on our 3 Link kits a minimum of 6.5 Inch of lift due to floor clearance!
- Last Update:
- 2026-04-01 10:57:20
- Brand Logo:
- https://www.asapnetwork.org/sites/default/files/brands/icons/COR-Logo-White-Background_0.jpg
- California Prop 65 Notice:
- WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Top Sellers:
- Top 100
- Vehicle Type:
- Jeep
