Overview:
2003-2008 Ram 2500/3500 4.5" Stage 4 Suspension System utilizes the same technology as the 2.5" systems while adding lift height and ground clearance. Additional engineered front end components are added to ensure proper steering geometry with improved function throughout the entire travel range whether on or off road. The Stage 4 System is comprised of dual rate coil springs, tubular steel upper & lower link arms, polyurethane bumpstops w/ billet extension, sway bar drop brackets, forged pitman arm, track bar drop bracket, 2.5" V.S. Series shocks, bearing style adjustable track bar, and rear 1.5" expansion pack with 1" lift block. ICON 2.5" Series shocks extend the performance of the kit by increasing the duration of consistent damping regardless of situation. These shocks include FK bearings, billet top cap & rod ends, 7/8" shafts for strength, and the industry only forged stem on a 2.5" shock with rolled threads. The adjustable track bar with bearings not only improves rigidity over flexible factory joints, but offers adjustability to center the front axle under the truck. ICON steel upper & lower links increase performance, strength, and range of alignment. These link arms decrease the bind found in the factory link bushings. The multi leaf expansion pack improves compliance with a more progressive rate. This ultimate performance system with link arms offers extraordinary diversity across any terrain, all while keeping a smooth highway feel. Installing this kit allows proper clearance for 35" tall tires with no modifications, and some 37" tires with minor fender well trimming for clearance. With the endless hours ICON has spent testing and tuning our suspension components and shocks together, you can rest assured you have the best suspension solution on the market.
Key Features:
- ICON engineered dual rate coil springs with match tuned 2.5" V.S. Series reservoir shocks
- Adjustable track bar with PTFE lined FK bearings
- Heavy-duty steel upper and lower link bars
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Correctly positioned steering and track bar components
- Level stance front to rear
- Less body roll than stock
- No drive shaft modifications needed
- Made in the USA
- Add-On:
- 191014 - .25" COLLAR SPANNER PIN WRENCH
- Dual Rate Coil Springs:
- Yes
- Front Spring Rate:
- 600
- OEM Wheels & Tires Fitment:
- Yes
- Position:
- Front and Rear
- Recommended Aftermarket Tires:
- 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required)
- Recommended Aftermarket Wheels:
- ICON Alloys - 18x9" w/ 5.50" BS / 12mm Offset
- Title:
- 03-08 RAM 2500/3500 4WD 4.5" STAGE 4 SUSPENSION SYSTEM
- Application Notes:
- Trucks equipped with 03-06 style steering will require 4” drop pitman arm (NOT INCLUDED) or upgrade to 07-12 steering setup. Trucks equipped with 07-12 style steering will need ICON pitman arm part number 214101.
- California Prop 65 Notice:
- WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
