COMEUP SEAL Gen2 20.0rs Trail Edition 12V Winch w/ Synthetic Rope and Wireless Remote 298232

Seal 20.0rs Trail Edition Winch includes a BossHook L & a 250A Fuse Kit

• 12V DC severe duty winch rated at 20,000 lb pulling meets or exceeds your expectations.
• Heavy duty series wound motor delivers superior torque output and faster line speed. A motor equipped with a thermal protection switch
• 4 equally positioned pin holes with an ergonomic T-handle make it possible to reposition in 90 degree Increments.
• Hardened steel, 3-stage planetary gear train for efficient and reliable operation.
• Both built-in digital two way signal wireless remote control and waterproof remote with thermometric indicator LED w/17' (5 m) cord
• A 12 strand construction synthetic rope coated to improve abrasion and has no water absorption.
• Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch.
• U.S. Germany, U.K. France, etcpatented mechanical cone brake holds the full load.
• BossHook L made of strong SCM440 alloy steel, MBS18,200 KG.
• The Fuse Kit is designed to protect the winch motor and controls from damage caused by Amperage overload or short circuit.
• Meet international standards of CE Machinery Directive 2006/42/EC, CE Electromagnetic Compatibility Directive 2014/30/EU, and SAE J706 Surface Vehicle standard 2003-08 rev.

Specifications: 

• Part number: PN 298210 (12V)
• Rated line pull: 9,072 kg / 20,000 lb single line
• Line speed ( 1^st layer): 4.5 mpm / 14.8 fpm 60A at 12V no load
                                         0.4 mpm / 1.3 fpm 410A at 12V full load
• Motor: 5,220 w / 7.0 hp 12V series wound                
• Gear train: 3-stage planetary 343:1
• Clutch (freespooling): Rotating ring gear
• Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
• Winch construction: Aluminum die cast housings with steel drum
• Drum size: 89 mm x 204L mm (3.5" x 8"L)
• Control: Both built-in digital two way signal wireless remote control and waterproof remote with thermometric indicator LED w/17' (5 m) cord
• Rope type: Synthetic rope 
• Rope size: 14 mm x 16.7 m (9/16" x 55’)
• Mounting bolt pattern: 254 mm x 114.3 mm (10” x 4.5”)
                                         254 mm x 165 mm (10" x 6.5")
• Mounting: Foot forward mounting only 
  * Remark: Only foot forward mounting can meet SAE J706

Warning

• The winch is not intended to be used in any manner for the movement or lifting of personnel.
• The rated line pull shown is based on the first layer of rope on the drum.
• The rope winding on the drum shall remain 10 wraps from the drum.
   

Warranty

• Limited lifetime warranty for mechanical components and three(3) years warranty for electrical components from date of purchase. Wire/Synthetic ropes are not included under warranty.