Jeep Wrangler JK 2007-2016Rear Track Bar Relocation Bracket
After seeing some other aftermarket trackbars bend or rip the OEM trackbar bracket off the axle, we knew we had to design something that would take most of the force off the OEM bracket. Our trackbar bracket is laser cut from 1/4 metal, and uses the OEM trackbar bracket for alignment purposes. This ensures it is properly installed. However most of our strength comes from the clamping force around the axle tube. Now the forces are distributed and failure is not a concern. This bracket can be used with the OEM trackbar or our adjustable trackbar. Works with lifts from 3-6 inches.
- Brand Logo:
- https://www.asapnetwork.org/sites/default/files/brands/icons/logo_3.png
- Last Update:
- 2024-03-11 04:41:54
- Vehicle Type:
- Jeep
- California Prop 65 Notice:
- CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- promotion_text:
- Get a free Outask Light when you spend $1,000 or more on select brands! Go to our promotions and rebate page for more information!
