For the do-it-yourself guys, we now offer our high quality battery tray as a stand alone kit. If you would like to use your own battery isolator and do the wiring yourself, or if you have specific needs that our full-featured kit does not meet, now you can get the bare battery tray and top lid alone. This kit comes with no components mounted onto the top lid, but you still get all the hardware you need to install it into your 2010 and up Toyota 4Runner.
Details:
- The kit includes everything you need to install the tray
- CNC laser cut and CNC bent steel battery tray
- Top lid with grommets for routing your wires
- Rubber caps over the pressed-in studs-you can use them or remove them
- Hardware to secure the top lid
- All hardware required to install the tray and move the fuse box backwards
- Fits 2010 and up Toyota 4Runner
- Uses the factory battery cables-no cutting required
- Powder coated for durability
- Proudly made in the USA
Follow our detailed instructions for installing the battery tray, then finish it off with your own custom wiring solution.
Battery Options:
- Any Group 25 size battery will fit our tray (Note the stock battery is not compatible)
- We recommend the Full River FT750-25, an excellent battery that has 750CCA (cold cranking amps) and 64aH (amp hours) of reserve capacity
- The Odyssey Performance Series ODP-AGM25 battery is also available, boasting 675CCA and 59aH of reserve capacity
- Both batteries must be the same physical size for the top lid to securely hold them in place
- resources:
- https://youtu.be/RhDPiXjSNpU