ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks with CDEV are the ideal upgrade for the front end of the 2021-UP Ford Bronco. These adjustable coilovers allow up to 3-4” of lift height adjustability on Broncos without the Sasquatch package or 2-3” of lift over stock Sasquatch equipped Broncos, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Electronic Valves (CDEV) are included to allow for lightning fast, precise electronic shock tuning, on-the-fly, at any speed and in any terrain. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the CDEV at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. ICON 2.5 Series rear coilovers with CDEV and matching IIC module are required for installation but vehicle control will be actively balanced front to rear, resulting in the best overall driving experience for your Ford Bronco.
- Add-On:
- 198000 - 2 PIN COILOVER SPANNER WRENCH KIT
- Adjustable Damping:
- Electronically
- Coil Over Springs Included:
- Yes
- Damping Type:
- Oil
- Dust Shield:
- No
- LTL:
- N
- Material:
- Steel
- Maximum Lift:
- 4
- OEM Wheels & Tires Fitment:
- Yes
- Position:
- Front
- Recommended Aftermarket Tires:
- (Without Sasquatch Package): 35" x 12.50" (Recommend high clearance crash bars part number 42000, 37" tires require coilover bump stop spacers along with trimming and modifications)
- Recommended Aftermarket Wheels:
- (With Sasquatch Package): ICON Alloys - 18x9" w/ 5.00" Backspace / 0mm Offset
- Service Parts:
- 252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT
- Shaft Diameter:
- 0.875
- Spring Color:
- Black
- Spring Rate Type:
- Linear
- Supplier Order ID:
- 487390
- Supplier Part Number:
- ico48700E
- Title:
- ICON 2021-2023 Ford Bronco, Front, 1.5-4” Lift, 2.5 VS RR/CDEV Coilover Kit
- Application Notes:
- When Running 35" Tires High Clearance Crash Bar Kit Part Number 42000 is Recommended; When Running 37" Tires Crash Bar Removal may be Required but is Not Recommended; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset; Li
- California Prop 65 Notice:
- WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
- Minimum Lift:
- 2