Jeep Gladiator Diesel 3.5 Inch Ride Right+ Lift Kit 2020+ JT Clayton Off Road

Our Brand new 2020+ Jeep Gladiator Ride Right+ Suspension Lift Systems are designed both with function and value as top priorities.

Our Ride Right+ suspension systems may be our brand-new base-priced kits but make no mistake these are not your average entry-level lift kit systems. The Ride Right+ system addresses the most critical parts of your vehicle's suspension, allowing for proper suspension geometry to keep your vehicle driving smoothly and safely, with the added benefit of being able to run larger size wheels and tires at a more budget-friendly price point.

Now available specifically for your Diesel Gladiator! Designed utilizing a slightly higher free length, as well as an increased spring rate of 216 lbs/in, these springs are built to handle the extra weight of your diesel engine while offering the same smooth and comfortable driving experience as our non-diesel coils.

Who is this kit designed for?

Clayton Off Roads' brand-new Ride Right+ Suspension System is for anyone looking to fit a larger set of wheels and tires, maintain ride quality with proper suspension geometry, and that primarily plans on keeping the vehicle on the pavement rather than on the trail.

Ride Right+, however, is designed to be fully upgradeable to our complete Overland+ Suspension System should you ever wish to add on the remaining adjustable control arms and components and turn your vehicle into the ultimate on and off-road machine!

What's included:

Adjustable front and rear track bars are both included in the Ride Right+ kit since proper suspension geometry is even more critical for on-road driving than for off-road. Even just cruising down the highway puts a load of stress on your vehicl's suspension. Without properly positioned axles, you're practically begging for an uncomfortable driving experience.

Thats why even when shopping for a budget-friendly lift kit option there are certain components that just shouldn't be compromised.

Note: This Kit now features our brand new JT Rear Track Bar with a tire clearance bend.

When it comes to on-road driving performance, caster angle is one of the most crucial components to address as it directly affects your vehicles steering and handling.

For this reason, adjustable front upper control arms are also included in the Ride Right+ suspension system. The distance from the center of the axle to the center of the upper control arms is greater than the center of the axle to the center of the lower control arms, which makes utilizing these front upper arms the most effective way to adjust your caster angle and address this critical piece of the suspension puzzle.

Adjustable sway bar links are also included since proper sway bar angles greatly affect your on-road ride and handling, which the factory rods would no longer be able to properly maintain with your vehicle's newly added height.

Of course, brand-new coil springs front and rear are included in the kit as well, so you'll be ready for those larger wheels and tires!

Installation Instructions