The E360 25 A DC-to-DC Lithium Alternator Charger is designed to charge a lithium battery bank from a tow vehicle or motor coach engine alternator through the chassis battery while the vehicle is traveling. This charger has a 2-stage profile providing 14.6 V for both bulk and absorption stages with no maintenance float stage. The charger is only designed for a lithium iron phosphate battery or battery bank. It may harm a lead-acid chemistry battery if used to charge it; therefore, it can not be used for a flooded, SLA, AGM, Gel, or any other type of lead-acid chemistry battery. The charger is simple to install; however, if used for a travel trailer, fifth wheel, or truck camper, a new positive cable will need to be run from the chassis battery and a negative cable from a common post to the connection location on the RV and then from that location to the charger. The existing 10- or 12-gauge charge line within the 7-way plug with a maximum rating of 30 A will not be adequate for this charger as it can pull up to 35 A on the input side of the circuit. The charger is IP68-rated and should be installed in a location with air circulation and movement. This item includes the charger only and does not include installation cabling, hardware, or a mounting bracket. The E360 25 A DC to DC charger includes a 24 month limited warranty.
- 25 Amp Output
- IP68
- Potted Circuitry
- Ignition Control
- Color:
- Silver
- resources:
- https://cdn.shopify.com/s/files/1/0469/5742/8899/files/DC_TO_DC_Mobile_Charger_Manual_V2.pdf?v=1620772248