Bilstein M 9300 Black Hawk shock absorbers are a position sensitive, adjustable bypass shock absorbers designed for off-road motorsports applications. Based on an aluminum extrusion, the hard anodized shock body will dissipate heat 30% faster than a steel body shock absorber. M 9300 Black Hawk shock absorbers use 4 IFMV’s (Incremental Bypass Flow Metering Valve), with 10 adjustable positions to perfectly adjust the rebound and compression damping. M 9300 Black Hawk shock absorbers utilize a 3 inch ID piston bore and an ACV (Anti-Cavitiation Valve), which is housed in a 4.5 inch OD remote reservoir. The ACV allows the shock absorber to operate with much lower gas pressure to eliminate oil cavitation. With the ACV, M 9300 Black Hawk shock absorbers can fully function at 70-90 PSI which improves the overall durability and comfort. These shock absorbers are completely owner rebuildable and revalvable with service parts readily available. M 9300 Black Hawk shock absorbers will provide the most advanced technology found in an off-road racing shock absorber today.
- Body Design:
- 4-Tube Bypass Screw Top
- Collapsed Length (in):
- 22.75
- Extended Length [in]:
- 34.75
- Body Inner Diameter:
- 76mm
- California Prop 65 Notice:
- WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
- Finish:
- Clear Hard Anodized
- Compression @ 0.52 m/s:
- Custom
- Collapsed Length (mm):
- 577.9
- Mount Type:
- Eye-to-Eye
- Extended Length [mm]:
- 882.7
- Extended Length [in] Rounded:
- 35.00
- Reservoir:
- Yes
- Lower Mount Type:
- 3/4in Heim
- Title:
- Bilstein Shock Absorbers
- Rebound @ 0.52 m/s:
- Custom
- Internal Design:
- Monotube
- Spring Seat Included:
- No
- Optional Reservoir Clamp:
- N/A
- Series:
- M 9300 Black Hawk
- Upper Mount Type:
- 3/4in Heim
