Dynatrac ProGrip™ Brake System for Jeep Wrangler JK

Dynatrac™ is setting a new standard in brake upgrades with the introduction of its ProGrip™ Brake System, designed to provide a significant braking improvement during off-roading and daily-driving experiences as well as in emergency stops. The first application of the ProGrip Brake Systems is the popular 2007-2015 Jeep Wrangler JK.



Dynatrac ProGrip™ Brake System for Jeep Wrangler JK

Double click on above image to view full picture

Zoom Out
Zoom In

The Dynatrac ProGrip™ Brake System comes with larger rotors for the front and rear, providing improved braking by moving the factory calipers farther from the axle centerline. The increased rear braking power provides balanced braking, reducing nose dive and dramatically improving the control of the vehicle in mild and hard braking conditions compared to upgrades that only address the front brakes. Significant research was done to select the optimum front and rear brake-pad linings to balance the system and provide additional stopping power.

Fully instrumented testing showed lower brake pedal pressure and a reduction in stopping distances of up to 30 percent compared to stock brakes on a Jeep JK outfitted with a 4-inch lift and 37-inch-tall tires. Measured G-force during moderate braking (1,000-psi brake fluid pressure) increased from 0.48 Gs with stock brakes to 0.63 Gs with the Dynatrac ProGrip system.

Another key advantage is that installation of the system does not require opening the brake hydraulics, thus avoiding the chore of bleeding the brakes after installation. Additionally, brake pedal feel and travel is improved after upgrading to the Dynatrac ProGrip Brake System.

The system is a direct bolt-on for 2007-2015 Jeep Wranglers and it includes:

  • 13.50-inch front rotors with unique pillar-vented cooling design.
  • 14.25-inch rear rotors with integral parking brake surface.
  • Stronger caliper brackets designed using CAD/FEA and advanced engineering tools.
  • Unique front and rear brake pads for optimum friction performance.

The Dynatrac ProGrip Brake System fits Jeep Wranglers with 17-inch wheels (wheel spacers are required with 17-inch factory wheels), and the system will fit in nearly all aftermarket wheels without spacers.

Vehicle Make


Vehicle Model

Wrangler JK

Vehicle Year

2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

Special Fitment Notes

No special fitment notes.

Manufacture Part Number


Part Number


Free Shipping




Installation Difficulty


Installation Instructions

Not Available

There are no reviews yet.
Be the first one who writes a review.

Post a New Review

You're reviewing: Dynatrac ProGrip™ Brake System for Jeep Wrangler JK

Only registered users can write reviews. Please, log in or register

Compare Products

You have no items to compare.