Zone Offroad 5" Suspension System 94-02 Dodge Ram 2500
Turn your 1994-1999 Dodge Ram 2500 into the truck you've always wanted! This 5" system features upper and lower extended heavy-duty control arms with greasable polyurethane bushings to properly center the axle and correct caster.
Turn your 1994-1999 Dodge Ram 2500 into the truck you've always wanted! This 5" system features upper and lower extended heavy-duty control arms with greasable polyurethane bushings to properly center the axle and correct caster. The dropped pitman arm combined with the heavy duty track bar bracket corrects the steering geometry and centers the axle.
Whether on road or offroad this system is built to perform including custom valved Zone shocks that have been tuned to the full height 5" coils as well as extended polyurethane bump stops
In the rear, a 5" rear block and add-a-leaf is used to replace the factory block, no stacking in this system.
-Aftermarket steering stabilizer required. Factory drag link mount taper will be flipped when dropped pitman arm is installed. Order proper Zone stabilizer listed in accessories if replacement is needed.
-Will not fit models built before February 9, 1994 due to track bar stud size.
-Factory block is replaced with 5" block and add-a-leaf combo to obtain a level stance.
-These models came equipped from the factory with two different factory sway bar link setups. For models that have the factory front sway bar links mounted ABOVE the axle bracket, optional sway bar link kit D5501 is required. For models that have the factory front sway bar links mounted BELOW the axle bracket, no additional sway bar link kit is required.
Featured Technology & Benefits
-Heavy duty greasable control arms included
-Extended length urethane bump stops
-Track bar relocation to properly center your axle
-Pitman arm included to maintain steering geometry
-Completely bolt on system
Install Time Hrs: 5-6
Difficulty Level 1-5: 2
|Special Fitment Notes||No|
|Installation Instructions||Not Available|