GenRight Universal Front Coilover Shock Hoop Kit - Original Style for Jeep TJ, LJ, YJ, or CJ
Front C/O Shock "Hoop" Kit (Flange style) - GEN
This is the GenRight "Original" coilover shock hoop kit for the Front of a Jeep TJ, LJ, YJ or CJ (Toyota, Suzuki, etc.) that is made in the popular "hoop" style which pushes the upper shock mount all the way up just under the hood. This will also allow you to run super long travel shocks and maintain a reasonable ride height and proper shock mounting for the best possible performance.
Our kit is designed to work with 2" or 2.5" diameter coil over shocks (of any brand) or 2.5" Air shocks in 12", 14" or 16" travel. This builders kit is the most universal on the market and can be cut and mounted in any position to best work with your particular Jeep's Engine & Suspension combination.
Additionally, the compact hoop size is ideal for fitting inside the inner fender well, INSIDE the engine compartment with just a small hole up through the top of the fender well for the shock to poke up through to the upper mount.
This is a great option when pushing your front axle forward (about 2+") to get to the Magic 100" wheelbase!
This is a clean way to convert over (a leaf or coil spring vehicle) to coilover shocks and and get that racing tubed out look!
For the TJ or LJ guys, this kit allows you to cut off and remove all the factory upper spring mount/bump stop bucket from the frame. This is perfect for placing the shock in virtually the optimal position for dampening performance and articulation.
For you CJ or YJ guys who are not ready to convert the entire front end over to coilovers, this can also be a great way to upgrade just the upper shock mount and convert over to shock "hoops" from the ugly stock mounts and install longer travel shocks and still keep the leaf springs.
This kit is made from heavy duty 1-1/2" diamter x .120" thick wall steel tubing and includes a removable crossbar to connect the two shock towers (over the engine) for maximum strength. This kit or the parts from this kit can also be modified and used on the rear for those guys looking to put coilovers on the rear.
We recommend and sell the KING 2. and 2.5" diameter coil over type shocks (with or without a remote reservoir) with a dual rate spring set that are valved for a Jeep. These shocks are also fine tunable by you, simply by changing the oil level, oil weight, springs, spring preload and/or nitrogen pressure level.