BajaRack UT Rack with SPY Light System for 2010-2016 Toyota 4Runner
Please Note: BajaRack is currently experiencing delays in production. Please call us prior to placing an order for an accurate lead time.
The rack includes our SPY Light System that, with a turn of a switch, turn on and reveal your hidden LED bar. You can also adjust the beam to give you maximum range. The top of this rack is completely flat to transport large objects such as lumber, canoes, roof top tents, etc. This rack was designed around the 4 factory mounting positions on the roof of the vehicle without obstructing the operation of the sunroof, there is a cutoff on the floor of the rack to avoid interference with the roof antenna. No drilling required. LED Bar not included. Spylight System is a Special UTility Rack and can't be retrofitted to our regular racks.
Includes rack, all mounts, stainless steel hardware, aluminum wind deflector, Spy Light actuator system, and Spy Light cable & switch. Compatible with Bajadesigns 40” S8, Rigid Industries 40" E-Series, and, with a bar support (please call to order this item separately), Vision X 35" XMITTER Low Profile LED bars. LED Lightbar and LED cable/switch are not included.
Please note that our SPY UTility racks are specially designed UTility racks specifically made to be compatible with our SPY Light System.
Material and Thickness: 1” (25.4mm) and 1/2”(12.7mm) Steel tubing
Wind Deflector: 0.062” (1.57mm) 5050-H32 Aluminum
Finish: Epoxy primer (rust inhibitor) with black powder coating
Rack weight: 80 Lb (36.28Kg)
Load Capacity: Dynamic (while driving) 300Lb (136 kg); Static 600Lb (272 kg)
Measurements: 47” (1193.8 mm) Wide x 92.5”(2349.5 mm) Long x 1.5” (38.1 mm) tall
Total Height (Top of roof to top of rack): 5"
Cargo area: 24.68ft² (2.29m²)
Mounting method: Roof mounts (2 front adjustable brackets and 4 support brackets)
|Special Fitment Notes||
No special fitment notes.
|Installation Instructions||Not Available|