BDS 8-1/2" Long Arm Lift Kit 1987-2001 Jeep Cherokee XJ
The BDS 8.5" XJ Long Arm system provides the best on and offroad capability you could ask for and is designed to clear 33x12.50's with room to flex. By maximizing the length of both the upper and lower control arms, BDS has minimized caster change for optimim handling and minimized road forces transmitted ultimately to your seat for the best ride.
BDS Suspension 8-1/2" Long Arm Lift Kit for the 1987 - 2001 Jeep Cherokee XJ.
The BDS 8.5" XJ Long Arm system provides the best on and offroad capability you could ask for and is designed to clear 33x12.50's with room to flex. By maximizing the length of both the upper and lower control arms, BDS has minimized caster change for optimim handling and minimized road forces transmitted ultimately to your seat for the best ride. To give you some idea, the lower arms are nearly bottomed out at just over 32" and the uppers at just over 28". This is about double the length of the factory control arms!
Although this XJ long arm system makes for a great daily driver, the true abilities of this system won' t be appreciated until you hit the rocks, dirt and mud. The 4-Link design maintains better axle control through wheel travel than any radius arm system because the upper to lower link relationship is not fixed, yet is tuned for optimum performance based on link length and operating angles. The control arm geometry is setup with the massive belly pan that incorporates the link mounts and is built to smash rocks. No welding to the uni-body is required nor recommended.
BDS Pro-Ride Coil Springs, built from 5160 spring steel & pre-set to withstand full coil bind with a tuned rate to lilft the front. The rear is lifted with new Glide-Ride Leaf Springs, 2" lift blocks, and extended greasable shackles that really let the springs flex.
This system also incorpoartes BDS Ultimate sway bar disconnects for quick easy access to rediculous wheel travel and stainless steel brake lines to handle it. Bump stop extension are included to limit compression and keep the tires out of the fenders on the trail. A front adjustable track bar fits into the existing frame mount, so drilling of the taper is not required and will allow you to accurately center the front axle. To match the steering w/ the track bar angle, an extreme drop pitman arm is provided.
This system is available with both flex and standard control arm bushings, and many other upgrades. To check it out all of the options BDS has for your XJ, customize your kit and see what our competition is up against.
Tire & Wheel Combinations
35" x 12.50" w/15 x 8 and 4" back spacing
Est. Installation: 10 hours
Difficulty Level (easy 1 - 5 complicated): 4
BDS Suspension Lift Kit Warranty
No Fine Print WarrantyAll BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".
Important Kit Notes
1. Measure the rear u-bolts before ordering. Some XJ's are equipped with a Dana 44 rear axle.
2. CV style rear driveshaft (not included) and slip yoke eliminator kit is required.
3. System only works with 4.0L motor and automatic transmission.
4. Some welding required.
5. '96 and earlier models may require a longer emergency brake cable.
|Special Fitment Notes||No special fitment notes.|
|Installation Instructions||Not Available|