BDS 6" 2009-2013 Dodge Ram 2500 Long Arm Lift Kit
This 6" long arm lift kit come with 6" Pro-Ride Coil Springs and features solid upper long arms and tubular lower long control arms. The long control arms reduce caster change through wheel travel creating a more controlled feeling in the steering wheel both on and off road
BDS Suspension 6" Long Arm Kit for the 2009-2013 Dodge 2500 3/4 Ton & 2009-2012 3500 1 Ton 4WD Gas & Diesel Pickup.
This 6" long arm lift kit come with 6" Pro-Ride Coil Springs and features solid upper long arms and tubular lower long control arms. The long control arms reduce caster change through wheel travel creating a more controlled feeling in the steering wheel both on and off road. This 4-Link long arm system retains the factory triangulation of the arms which adds to the stability of the suspension system. A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket is included to properly center the axle under the vehicle. Extended bump stops and sway bar links are included to maintain the OE characteristics. All four control arms are greasable for long term performance. The extended length lower control arms reduce caster change through wheel travel.Not only is the kit designed to last, but so is the finish. Every bracket and control arm is powder coated black for long term performance.
A few of the many optional accessories offered with this 6" lift kit are a steering stabilizer, brake lines, traction bars, and shock options.
Check out the install article done by Four Wheeler Magazine.
Tire & Wheel Combinations
37" x 12.50" w/17 x 9 and 5" back spacing
Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 3
BDS Suspension Lift Kit Warranty
No Fine Print WarrantyAll BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".
Important Kit Notes
1. Measure rear axle tube before ordering. Some 4" axle models with dual overload springs will require 4068.
2. Rear lift options will not fit dually applications.
3. If driveline vibration occurs, order either transfer case drop or indexing kit available in optional accessories.NOTE: 122606 Transmission drop kit will only replace the OE bracket #52121938AA
4. 102009 Rear brake lines will not fit 2012 models.
5. Kit will also work on gas models. But will require coil springs (032601) and spacer (012201) in place of coil springs (032801).
6. Additional front driveline modification may be required.
7. Exhaust modification will be required for dual rear shock kit 122009.
|Special Fitment Notes||No special fitment notes.|
|Installation Instructions||Not Available|