+

Please confirm you are not a robot

BDS 4" 4-Link Suspension Lift Kit 2005-2007 Ford F250/F350 4WD

By

Bds

2055.95 $2,055.95
+

Why a 4-link system? It's simple, through full wheel travel there is less than 1 degree of caster change (front axle rotation), this means control in the steering wheel over rough terrain. The stability in the steering wheel is noticable even under normal driving conditions. In addition to 4 beefy control arms, this kit comes with new 4-link frame mounting brackets.

BDS Suspension 4" 4-Link Suspension Lift Kit for 2005-2007 Ford F250/F350 4WD pickup trucks.

Why a 4-link system? It's simple, through full wheel travel there is less than 1 degree of caster change (front axle rotation), this means control in the steering wheel over rough terrain. The stability in the steering wheel is noticable even under normal driving conditions. In addition to 4 beefy control arms, this kit comes with new 4-link frame mounting brackets. These aren't a drop down bracket, they actually replace the stock mounting system. -Don't worry, no welding required. The kit also comes with a new steering stabilizer, anti-sway bar drop brackets, a dropped pitman arm for steering angle correction, a track bar relocation bracket to properly center your axle and bump stop extension.

The rear is lifted via a 3" block and U-bolt kit or choose to upgrade to BDS full replacement leaf springs.

Choose between gas and diesel configurations, as well as plenty of upgrades and acessories when customizing your kit.

Tire & Wheel Combinations
35" x 12.50" w/17 x 9 and 4.5" back spacing
Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 3

BDS Suspension Lift Kit Warranty
No Fine Print WarrantyAll BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".

Important Kit Notes
1. These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.
2. Removal of O.E. block in the rear is required.
3. Front dual shock hoop requires different cylinders than what comes in the base kit.
4. If equipped with 2 piece driveshaft, a driveshaft alignment kit may be required.

More Information
Special Fitment Notes No special fitment notes.
SKU BDS345h
Free Shipping Yes
Installation Difficulty No
Installation Instructions Not Available