Rare Parts Heavy Duty Upgrade Kit for 2007+ Jeep Wrangler JK

We've put together this kit so you can easily upgrade your 2007+ Jeep Wrangler JK steering components!

$699.95

1

Rare Parts Heavy Duty Upgrade Kit for 2007+ Jeep Wrangler JK

Double click on above image to view full picture

Zoom Out
Zoom In

We've put together this kit so you can easily upgrade your 2007+ Jeep Wrangler JK steering components!


This kit includes:

  • Rare Parts Fab Series Heavy Duty Drag Link Assembly w/ Tube
  • Rare Parts Fab Series Heavy Duty Tie Rod Assembly Kit


More information about these parts
New Rare Parts FAB Series Drag Link Assembly
The Last Drag Link you will ever need to buy. Heavy Duty Modular design allows you to easily replace broken parts on the trail. If you decide to upgade front axles or upgrade to a high steer system the FAB Series Drag Link assembly will convert with minimal effort. Also Check out the Matching HD Tie Rod Assembly Kit #29429. We also offer both kits together as a set at a savings. See part number 29428-9. Another option we have available is both kits without the tube and with threaded weld in inserts instead. This allows you to use a material an size of your choice. see part number 29418, 29419 and 29418-9


Drag Link Kit Includes:
One Straight LH Thread and One Bent RH Thread Tie Rod Forgings, Two Replaceable Cartridges, One LH Thread and One RH Thread Jam Nuts, 1.75" OD 1026 DOM sleeve cut to the proper length, with machined threads and milled wrench flats - with a charcoal gray powder coat.

Tie Rod Forging Specs

  • Straight Rod End
  • Thread: 1 1/4"-12 Threads
  • Thread Direction: Left Hand Thread (Screws on Counter Clock-Wise)
  • Thread Length: 3 1/2"
  • Rod End Length: 12.250" Center of Hole to End
  • Bent Rod Forging Specs
  • Thread: 1 1/4"-12 Threads
  • Thread Direction: Right Hand Thread (Screws on Clock-Wise)
  • Thread Length: 3 1/2"
  • Rod End Length: 11.909" Center of Hole to End
  • Bend Notes: Has a 27º bend, Bend is 7" from center of cartridge threads to center of the bend, and 5 1/8" from center of the bend to the end of the threads.


Cartridge Specs:

  • Taper Size: Small End of Taper .657"
  • Taper angle: 1.5" Per Foot
  • Includes: Dust Boot, Lock Nut, Grease Fitting


Tube Specs:

  • Finish: Charcoal Grey Powdercoat
  • Threads: 1 1/4"-12 Machined
  • Material: 1026 DOM

 

New Rare Parts FAB Series Tie Rod Assembly Kit With Tube
The Last Tie Rod Assembly you will ever need to buy. Heavy Duty Modular design allows you to easily replace broken parts on the trail. If you decide to upgade front axles or upgrade to a high steer system the FAB Series Drag Link assembly will convert with minimal effort. Also Check out the Matching HD Drag Link Assembly Kit #29428. We also offer both kits together as a set at a savings. See part number 29428-9. Another option available is the same kits without the tube and with threaded inserts instead. This allows you to use whatever material you choose to make the tubes

Tie Rod Assembly Kit Includes:
One Offset LH Thread and One Offset RH Thread Tie Rod Forgings, Two Replaceable Cartridges, One LH Thread and One RH Thread Jam Nuts, 1.75" OD 1026 DOM sleeve cut to the proper length, with machined threads and milled wrench flats - with a charcoal gray powder coat., Two Tie Rod Lock Washers (Prevent Tie Rod Assembly From Twisting Down) and Two Seals, Stabilizer Bracket and Hardware. 

Tie Rod Forging Specs

  • Offset Tie Rod End
  • Thread: 1 1/4"-12 Threads
  • Thread Direction: One Left Hand Thread (Screws on Counter Clock-Wise)
  • One Right Hand Thread (Screws on Clock-Wise)
  • Thread Length: 3 1/2"
  • Rod End Length: 12.250" Center of Hole to End
  • Offset Notes: Has a 1 1/2" offset Z-bend and is 2 7/8" from center of cartridge threads to the first bend, 3 5/8" from center of bend to center of bend, and 5 3/4" from second bend to the end of the threads.


Cartridge Specs:

  • Taper Size: Small End of Taper .657"
  • Taper angle: 1.5" Per Foot
  • Includes: Dust Boot, Lock Nut, Grease Fitting


Threaded Insert Specs

  • Wrench Flats: 1 3/4"
  • Tubing Size: Fits 1.5" ID Tubing


Tubing Specs:

  • Finish: Charcoal Grey powdercoat
  • Threads: 1 1/4"-12 Machined
  • Material: 1026 DOM

Vehicle Make

Jeep

Vehicle Model

Wrangler JK

Vehicle Year

2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

Special Fitment Notes

No special fitment notes.

Manufacture Part Number

RAR RP29429 + RP29428

Part Number

No

Free Shipping

Yes

Manufacturer

Rare Parts

Installation Difficulty

No

Installation Instructions

Not Available

There are no reviews yet.
Be the first one who writes a review.

Post a New Review

You're reviewing: Rare Parts Heavy Duty Upgrade Kit for 2007+ Jeep Wrangler JK

Only registered users can write reviews. Please, log in or register

Compare Products

You have no items to compare.