BDS 3" Suspension Lift Kit 2007-2011 Jeep Wrangler JK 2dr
BDS Suspension 3" Lift Kit for the 2007-11 Jeep Wrangler JK 2 door 4WD - Standard Jeep or Rubicon.
FMVSS No.126 compliant
Right Hand Drive Compatible
Specifically intended for 2007-11 models, this system includes an exhaust extension kit that maximizes allowable wheel travel with the factory front driveshaft. This kit comes with 3" Pro-Ride Coil Springs capable of full coil bind and 2" bump stop extensions to control the compression travel, but increase wheel travel. Brake line relocation brackets are supplied to handle the added wheel travel. Many companies don't include anything to correct your alignment, but BDS includes octo cam washers for the front lower control arms to fine tune the caster angle.
Fixed swaybar links are included for Rubicon models with the factory disconnect system, for non-Rubicon models choose between BDS Ultimate Sway Bar
Disconnects or JKS Quicker Disconnects. In the rear, sway bar drop brackets are included instead of longer sway bar links to allow the use of a factory wheel and larger tire. To correct the rear axle shift from the lift, a rear frame mounted track bar relocation bracket is included. The kit comes standard with BDS 5500 series custom valved shock absorbers for a smooth ride.
BDS carries a large selection of accessories for Jeep JK's so check out what is available for this 3" lift by customizing your system.
Tire & Wheel Combinations
35" x 12.50" w/16 x 8 and 4-1/2" back spacing
Est. Installation: 6 hours
Difficulty Level (easy 1 - 5 complicated): 2
BDS Suspension Lift Kit Warranty
No Fine Print WarrantyAll BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".
Important Kit Notes
1. Will not fit 2wd models.
2. Exhaust modification may be required.
3. This kit is FMVSS No.126 CompliantFMVSS No.126 compliantThe NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well.
BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.4. This kit is right hand drive compatible.Right Hand Drive Compatible Follow right hand drive installation instructions when installing this kit on a right hand drive vehicle.
2007, 2008, 2009, 2010, 2011
Special Fitment Notes
No special fitment notes.
Manufacture Part Number
You have no items to compare.