VIAIR 2on2 Bolt-On Platforms

Using two high output compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high speed onboard air system that provides 150 PSI maximum pressure.

$0.00

VIAIR 2on2 Bolt-On Platforms

Double click on above image to view full picture

Zoom Out
Zoom In
  • VIAIR 2on2 Bolt-On Platforms
  • VIAIR 2on2 Bolt-On Platforms

High-Speed (Jeep JK)

  • Using two high output compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high speed onboard air system that provides 150 PSI maximum pressure. Available as a model-specific bolt-on application for 2007-2011 Jeep JK with a crossmember mounting bracket – 2on2 systems all come complete with an easy-to-install wiring harness and manifold to make wiring and plumbing the system straightforward.

Note: 2on2 Bolt-On Platform systems in model specific applications for 2007-2011 Jeep JK are equipped with a crossmember mounting bracket.

Included Parts:

Pre-installed:
- 2.0 Gallon 5-Port Air Tank
- (2) 400C Air Compressors
- (2) 1/4” Stainless Braided Leader Hoses 
- (2) 1/4” JIC Fittings on Leader Hoses
- 1/4” NPT Swivel to 1/4” NPT Swivel 
- T-Fitting (Remote Mount Filter)
- 1/4” NPT Drain Cock
- Sealed Pressure Switch with Delphi Connectors 
    (110 PSI On, 145 PSI Off)
- (2) Loomed Compressor Wires Terminated with Delphi Connectors
- Inline Fuse Holder with Fuse
- 1/4” NPT Safety Valve 
- (4) 1/4” NPT M Recessed Plugs

Included in Kit:
- Crossmember Mounting Bracket
- 60-amp Fuse & Fuse Holder
- 80-amp Relay
- (2) 1/4” BSP Adapters for Air Lockers
- T-Fitting 1/4" NPT F x 1/4" NPT F x 1/4" NPT M
- 1/8" to 1/4" NPT Reducer
- Wiring Harness with Delphi Connectors
- (2) Delphi Connector Plug Kits
- Billet 1/4” NPT x 6-Port Manifold and Mounting Bracket
- Air Filter Housing with Installed Element
- (2) Replacement Air Filter Elements
- Dash Panel Air Pressure Gauge (0-160 PSI Illuminated) 
- Air Pressure Regulator 
- 15ft. DOT Air Line

Specifications:

- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 33% @ 100 PSI
- Max. Working Pressure: 150 PSI
- Max. Amp Draw: 60 Amps
- Dimensions: 18.5"L x 5.9"W x 13.5"H
- Net Weight: 30 lbs.

Performance Data:

PSICFMABARLPMA
0 4.55 36 0 129.0 36
10 4.18 39 1.0 116.0 41
20 3.96 42 2.0 107.0 43
30 3.74 44 3.0 96.5 45
40 3.50 45 4.0 88.0 48
50 3.25 46 5.0 81.0 50
60 3.07 48 6.0 76.0 50
70 2.90 49 7.0 69.5 51
80 2.75 50 8.0 62.0 51
90 2.65 51 9.0 51.5 49
100 2.47 51 10.0 46.0 49
110 2.26 51  
120 2.05 50  
130 1.84 50  
140 1.70 49  
150 1.48 49

* Supply Voltage: 13.8 Volts

Fill Rates:

2.0 Gallon TankFill Rate
0 to 145 PSI 54 sec.
110 to 145 PSI 19 sec.

 

High-Speed (Universal)

  • Using two high output compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high speed onboard air system that provides 150 PSI maximum pressure. 2ON2 systems all come complete with an easy-to-install wiring harness and manifold to make wiring and plumbing the system straightforward.


Note: 2on2 Bolt-On Platform systems in universal models are not equipped with a crossmember mounting bracket.

Included Parts:

Pre-installed:
- 2.0 Gallon 5-Port Air Tank
- (2) 400C Air Compressors
- (2) 1/4” Stainless Braided Leader Hoses 
- (2) 1/4” JIC Fittings on Leader Hoses
- 1/4” NPT Swivel to 1/4” NPT Swivel 
- T-Fitting (Remote Mount Filter)
- 1/4” NPT Drain Cock
- Sealed Pressure Switch with Delphi Connectors 
    (110 PSI On, 145 PSI Off)
- (2) Loomed Compressor Wires Terminated with Delphi Connectors
- Inline Fuse Holder with Fuse
- 1/4” NPT Safety Valve 
- (4) 1/4” NPT M Recessed Plugs

Included in Kit:
- 60-amp Fuse & Fuse Holder
- 80-amp Relay
- (2) 1/4” BSP Adapters for Air Lockers
- T-Fitting 1/4" NPT F x 1/4" NPT F x 1/4" NPT M
- 1/8" to 1/4" NPT Reducer
- Wiring Harness with Delphi Connectors
- (2) Delphi Connector Plug Kits
- Billet 1/4” NPT x 6-Port Manifold and Mounting Bracket
- Air Filter Housing with Installed Element
- (2) Replacement Air Filter Elements
- Dash Panel Air Pressure Gauge (0-160 PSI Illuminated) 
- Air Pressure Regulator
- 15ft. DOT Air Line

Specifications:

- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 33% @ 100 PSI
- Max. Working Pressure: 150 PSI
- Max. Amp Draw: 60 Amps
- Dimensions: 18.5"L x 5.9"W x 13.5"H
- Net Weight: 30 lbs.

Performance Data:

PSICFMABARLPMA
0 4.55 36 0 129.0 36
10 4.18 39 1.0 116.0 41
20 3.96 42 2.0 107.0 43
30 3.74 44 3.0 96.5 45
40 3.50 45 4.0 88.0 48
50 3.25 46 5.0 81.0 50
60 3.07 48 6.0 76.0 50
70 2.90 49 7.0 69.5 51
80 2.75 50 8.0 62.0 51
90 2.65 51 9.0 51.5 49
100 2.47 51 10.0 46.0 49
110 2.26 51  
120 2.05 50  
130 1.84 50  
140 1.70 49  
150 1.48 49 * Supply Voltage: 13.8 Volts

Fill Rates:

2.0 Gallon TankFill Rate
0 to 145 PSI 54 sec.
110 to 145 PSI 19 sec.

 

High-Pressure (Jeep JK)

  • Using two high output compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high pressure onboard air system that provides 200 PSI maximum pressure. Available as a model-specific bolt-on application for 2007-2011 Jeep JK with a crossmember mounting bracket – 2on2 systems all come complete with an easy-to-install wiring harness and manifold to make wiring and plumbing the system straightforward.


Note: 2on2 Bolt-On Platform systems in model specific applications for 2007-2011 Jeep JK are equipped with a crossmember mounting bracket.

Included Parts:

Pre-installed:
- 2.0 Gallon 5-Port Air Tank
- (2) 380C Air Compressors
- (2) 1/4” Stainless Braided Leader Hoses 
- (2) 1/4” JIC Fittings on Leader Hoses
- 1/4” NPT Swivel to 1/4” NPT Swivel 
- T-Fitting (Remote Mount Filter)
- 1/4” NPT Drain Cock
- Sealed Pressure Switch with Delphi Connectors 
    (165 PSI On, 200 PSI Off)
- (2) Loomed Compressor Wires Terminated with Delphi Connectors
- Inline Fuse Holder with Fuse
- 1/4” NPT Safety Valve 
- (4) 1/4” NPT M Recessed Plugs

Included in Kit:
- Crossmember Mounting Bracket
- 60-amp Fuse & Fuse Holder
- 80-amp Relay
- (2) 1/4” BSP Adapters for Air Lockers
- T-Fitting 1/4" NPT F x 1/4" NPT F x 1/4" NPT M
- 1/8" to 1/4" NPT Reducer
- Wiring Harness with Delphi Connectors
- (2) Delphi Connector Plug Kits
- Billet 1/4” NPT x 6-Port Manifold and Mounting Bracket
- Air Filter Housing with Installed Element
- (2) Replacement Air Filter Elements
- Dash Panel Air Pressure Gauge (0-200 PSI Illuminated) 
- Air Pressure Regulator 
- 15ft. DOT Air Line

Specifications:

- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 55% @ 200 PSI
- Max. Working Pressure: 200 PSI
- Max. Amp Draw: 44 Amps
- Dimensions: 18.5"L x 5.9"W x 13.5"H
- Net Weight: 30 lbs.

Performance Data:

PSICFMABARLPMA
0 2.54 24 0 72.0 24
10 2.47 25 1.0 69.0 26
20 2.40 27 2.0 65.5 29
30 2.31 29 3.0 62.0 30
40 2.22 30 4.0 58.5 32
50 2.14 31 5.0 55.5 33
60 2.05 32 6.0 52.5 34
70 1.98 33 7.0 50.0 35
80 1.91 34 8.0 47.0 35
90 1.84 34 9.0 44.0 35
100 1.77 35 10.0 41.0 35
110 1.70 35 11.0 37.0 34
120 1.62 35 12.0 34.0 34
130 1.55 35 13.0 31.0 33
140 1.48 35 14.0 28.5 32
150 1.41 35      
160 1.31 34      
170 1.24 34      
180 1.17 34      
190 1.09 33      
200 1.02 32 * Supply Voltage: 13.8 Volts

Fill Rates:

2.0 Gallon TankFill Rate
0 to 200 PSI 2 min. 50 sec.
165 to 200 PSI 40 sec.

 

High-Pressure (Universal)

  • Using two high output compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high pressure onboard air system that provides 200 PSI maximum pressure. 2on2 systems all come complete with an easy-to-install wiring harness and manifold to make wiring and plumbing the system straightforward.


Note: 2on2 Bolt-On Platform systems in universal models are not equipped with a crossmember mounting bracket.

Included Parts:

Pre-installed:
- 2.0 Gallon 5-Port Air Tank
- (2) 380C Air Compressors
- (2) 1/4” Stainless Braided Leader Hoses 
- (2) 1/4” JIC Fittings on Leader Hoses
- 1/4” NPT Swivel to 1/4” NPT Swivel 
- T-Fitting (Remote Mount Filter)
- 1/4” NPT Drain Cock
- Sealed Pressure Switch with Delphi Connectors 
    (165 PSI On, 200 PSI Off)
- (2) Loomed Compressor Wires Terminated with Delphi Connectors
- Inline Fuse Holder with Fuse
- 1/4” NPT Safety Valve 
- (4) 1/4” NPT M Recessed Plugs

Included in Kit:
- 60-amp Fuse & Fuse Holder
- 80-amp Relay
- (2) 1/4” BSP Adapters for Air Lockers
- T-Fitting 1/4" NPT F x 1/4" NPT F x 1/4" NPT M
- 1/8" to 1/4" NPT Reducer
- Wiring Harness with Delphi Connectors
- (2) Delphi Connector Plug Kits
- Billet 1/4” NPT x 6-Port Manifold and Mounting Bracket
- Air Filter Housing with Installed Element
- (2) Replacement Air Filter Elements
- Dash Panel Air Pressure Gauge (0-160 PSI Illuminated) 
- Air Pressure Regulator
- 15ft. DOT Air Line

Specifications:

- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 55% @ 200 PSI
- Max. Working Pressure: 200 PSI
- Max. Amp Draw: 44 Amps
- Dimensions: 18.5"L x 5.9"W x 13.5"H
- Net Weight: 30 lbs.

Performance Data:

PSICFMABARLPMA
0 2.54 24 0 72.0 24
10 2.47 25 1.0 69.0 26
20 2.40 27 2.0 65.5 29
30 2.31 29 3.0 62.0 30
40 2.22 30 4.0 58.5 32
50 2.14 31 5.0 55.5 33
60 2.05 32 6.0 52.5 34
70 1.98 33 7.0 50.0 35
80 1.91 34 8.0 47.0 35
90 1.84 34 9.0 44.0 35
100 1.77 35 10.0 41.0 35
110 1.70 35 11.0 37.0 34
120 1.62 35 12.0 34.0 34
130 1.55 35 13.0 31.0 33
140 1.48 35 14.0 28.5 32
150 1.41 35  
160 1.31 34  
170 1.24 34  
180 1.17 34  
190 1.09 33  
200 1.02 32 * Supply Voltage: 13.8 Volts

Fill Rates:

2.0 Gallon TankFill Rate
0 to 200 PSI 2 min. 50 sec.
165 to 200 PSI 40 sec.

Vehicle Make

No

Vehicle Model

N/A

Vehicle Year

N/A

Special Fitment Notes

No

Manufacture Part Number

VIAIR 2on2 Bolt-On Platforms

Part Number

N/A

Free Shipping

No

Manufacturer

Viair

Installation Difficulty

No

Installation Instructions

Not Available

There are no reviews yet.
Be the first one who writes a review.

Post a New Review

You're reviewing: VIAIR 2on2 Bolt-On Platforms

Only registered users can write reviews. Please, log in or register

Compare Products

You have no items to compare.